Kodak printers are always the best in the market. Still, sometimes we see some issues keep on happening in these printers. Kodak ESP C310 is among the most preferred printers of Kodak. If you are facing any troubles with this printer, then you can always know basic troubleshooting methods to solve them without going to a technician. In this post, we will discuss common Kodak ESP C310 printer problems and how to solve them easily.
The printer does not power on issue
This is a very common issue among printers of any brand. It can be fixed easily if you follow the steps given below.
• Ensure that you are using the same power cord that came in with your printer.
• Attach the power cable to the AC Adapter and make sure it is plugged into a vent or power strip and watch out whether the LED on the adapter is set alight.
Printer not detected issue
Use a 2.0 high-speed cable if in case using a USB cable. Restart the computer with the disconnected USB and then reconnect it with the printer. In case you are using a wireless network, ensure that the printer is connected to that wireless network, the steps you need to follow are:
• Press “Home” on the printer.
• Tap OK.
• Ensure that the Active Joining Type is Wi-Fi and that the IP Address cannot be zeros. Now your router is transmitting information and the firewall is permitting the services required for your printer.
Carriage jam issue
• Switch on the printer access door and clear blockages, if any.
• Check whether the printhead and ink containers are fitted correctly.
These are the few common problems you can face with the Kodak ESP C310 printer. If you keep the steps written in this post in mind, then you can solve them easily without depending on technicians. If still there are troubles, then you can contact the help center of this brand to assist you to solve your issues.
Comments